PC開機自檢出錯代碼

Code Description (Diagnostic Error Codes):

1x undetermined problem errors
2x power supply errors
61 battery error (PS2)
62 configuration changed but no adaptors changed or CRC error
63 memory size during POST does not match CMOS RAM
65 card Id's in CMOS do not match system

1xx System Board Errors: （系統主闆）

101 system board failed
102 BIOS ROM checksum error (PC, XT), Timer (AT)
103 BASIC ROM checksum error (PC, XT), Timer interrupt (AT)
104 interrupt controller (PC, XT), Protected mode (AT)
105 timer (PC,XT), Last 8042 command not accepted (AT)
106 converting logic test failure
107 adapter card or math coprocessor (NMI)
108 timer bus test
109 DMA test error
110 system board memory error (PS2)
111 adapter memory
112 system unit adapter failure
114 system unit and adapter card unit failure (PS1)
121 unexpected hardware interrupt
131 cassette wrap test failed
151 real-time clock, CMOS RAM or battery
152 real-time clock
161 system options error, battery failure
162 CMOS RAM configuration error
163 CMOS time and date not set
164 system memory configuration is incorrect
165 adapter added/removed
199 user indicated configuration not correct

2xx RAM Errors:（内存）

201 memory test error
202 memory address error (Line error 0 - 15)
203 memory address error (Line error 16 - 23)
216 motherboard memory

3xx Keyboard Errors:（鍵盤）

301 keyboard did not respond to software reset or a stuck
    (number preceding 301 is scan code for stuck key)
302 user indicated keyboard error or AT system unit is locked
303 keyboard or system board error
304 keyboard or system board error; CMOS does not match system
341 replace keyboard
342 replace keyboard interface cable
343 replace enhancement card or cable
365 keyboard (replace keyboard)
366 interface cable (replace cable)
367 enhancement card or cable (replace)

4xx Monochrome Monitor Errors:（單色顯示器）

401 monochrome memory test, horizontal sync frequency
    test, or video test failed
408 user indicated display attributes failure
416 user indicated character set failure
424 user indicated 80x25 mode failure
432 parallel port test failed (monochrome adapter)

5xx Color Monitor Errors:（彩色顯示器）

501 CGA memory test failed, horizontal sync frequency test, or
    video test failed
508 user indicated display attribute failure
516 user indicated character set failure
524 user indicated 80x25 mode failure
532 user indicated 40x25 mode failure
540 user indicated 320x200 graphics mode failure
548 user indicated 640x200 graphics mode failure
556 light pen test
564 user indicated screen paging test

6xx Diskette Drive/Adapter Errors:（磁盤驅動器/接口卡）

601 diskette power on diagnostics test failed
602 diskette test failed (boot record not valid)
603 diskette size error
606 diskette verify function failed
607 write protected diskette
608 bad command diskette status returned
610 diskette initialization failed
611 time-out - diskette status returned
612 bad NEC FDC - diskette status returned
613 bad DMA - diskette status returned
614 DMA boundary error
621 bad seek - diskette status returned
622 bad CRC - diskette status returned
623 record not found - diskette status returned
624 bad address mark - diskette status returned
625 bad NEC seek - diskette status returned
626 diskette data compare error
627 diskette change line error
628 diskette removed

7xx Coprocessor Errors:（協處理器）

701 coprocessor test failure

9xx Parallel Printer Adapter Errors:（并行口）

901 parallel printer adapter test failed

10xx Alternate Parallel Printer Adapter Errors:（預備并行口）

1001 alternate printer adapter test failure

11xx Asynchronous Communcations Adapter Errors:（通信口）

1101 asynchronous communications adapter test failed
1110 modem status register not clear
1111 ring-indicate
1112 trailing edge ring-indicate
1113 receive and delta receive line signal detect
1114 receive line signal detect
1115 delta receive line signal detect
1116 line control register: all bits cannot be set
1117 line control register: all bits cannot be reset
1118 transmit holding and/or shift register stuck on
1119 data ready stuck on
1120 interrupt enable register: all bits cannot be set
1121 interrupt enable register: all bits cannot be reset
1122 interrupt pending stuck on
1123 interrupt ID register stuck on
1124 modem control register: all bits cannot be set
1125 modem control register: all bits cannot be reset
1126 modem status register: all bits cannot be set
1127 modem status register: all bits cannot be reset
1128 interrupt ID
1129 cannot force overrun error
1130 no modem status interrupt
1131 invalid interrupt pending
1132 no data ready
1133 no data available interrupt
1134 no transmit holding interrupt
1135 no interrupts
1136 no received line status interrupt
1137 no receive data available
1138 transmit holding register not empty
1139 no modem status interrupt
1140 transmit holding register not empty
1141 no interrupts
1142 no IRQ4 interrupt
1143 no IRQ3 interrupt
1144 no data transferred
1145 maximum baud rate
1146 minimum baud rate
1148 time-out error
1149 invalid data returned
1150 modem status register error
1151 no DSR and delta DSR
1152 no DSR
1153 no delta DSR
1154 modem status register not clear
1155 no CTS and delta CTS
1156 no CTS
1157 no delta CTS

12xx Alternate Asynchronous Communications Adapter Errors:（預備通信口）

1200-1257 same as 1100-1157

13xx Game control Adapter Errors:（遊戲接口）

1301 game control adapter test failed
1302 joystick test failed
1380 audio card and joystick (PS1)

14xx Printer Errors:（打印機）

1401 printer test failed
1404 matrix printer failed

15xx SDLC Communications Adapter Errors:（SDLC通信接口卡）

1501 adapter test failure
1510 8255 port b failure
1511 8255 port a failure
1512 8255 port c failure
1513 8253 timer 1 did not reach terminal count
1514 8253 timer 1 stuck on
1515 8253 timer 0 did not reach terminal count
1516 8253 timer 0 stuck on
1517 8253 timer 2 did not reach terminal count
1518 8253 timer 2 stuck on
1519 8273 port b error
1520 8273 port a error
1521 8273 command/read time-out
1522 interrupt level 4 failure
1523 ring Indicate stuck on
1524 receive clock stuck on
1525 transmit clock stuck on
1526 test indicate stuck on
1527 ring indicate not on
1528 receive clock not on
1529 transmit clock not on
1530 test indicate not on
1531 DSR not on
1532 CD not on
1533 CTS not on
1534 DSR stuck on
1535 CD stuck on
1536 CTS stuck on
1537 level 3 interrupt failure
1538 receive interrupt results error
1539 wrap data compare error
1540 DMA channel 1 error
1541 DMA channel 1 error
1542 error in 8273 error checking or status reporting
1547 stray interrupt level 4
1548 stray interrupt level 3
1549 interrupt presentation sequence time-out

16xx Display Emulation Errors（顯示模拟，用于CGA）

17xx Fixed disk Errors:（硬盤）

1701 post error
1702 adapter error
1703 drive error (seek)
1704 adapter or drive error
1705 no record found
1706 write fault error
1707 track 0 error
1708 head select error
1709 defective error check
1710 read buffer overrun
1711 bad address mark
1712 undetermined error
1713 data compare error
1714 drive not ready
1780 disk 0 failure
1781 disk 1 failure
1782 disk controller failure
1790 fixed disk 0 error
1791 fixed disk 1 error

18xx I/O Expansion Unit Errors:（I/O端口擴展）

1801 I/O expansion unit POST error
1810 enable/disable failure
1811 extender card wrap test failed (disabled)
1812 high order address lines failure (disabled)
1813 wait state failure (disabled)
1814 enable/disable could not be set on
1815 wait state failure (enabled)
1816 extender card wrap test failed (enabled)
1817 high order address lines failure (enabled)
1818 disable not functioning
1819 wait request switch not set correctly
1820 receiver card wrap test failure
1821 receiver high order address lines failure

19xx 3270 PC Attachment Card Errors

20xx Bisync Communications Adapter Errors:

2010 8255 port a failure
2011 8255 port b failure
2012 8255 port c failure
2013 8253 timer 1 did not reach terminal count
2014 8253 timer 1 stuck on
2016 8253 timer 2 didn't reach terminal count or timer 2 stuck on
2017 8251 DSR failed to come on
2018 8251 CTS not sensed
2019 8251 DSR stuck on
2020 8251 CTS stuck on
2021 8251 hardware reset failed
2022 8251 software reset failed
2023 8251 software error reset failed
2024 8251 transmit ready did not come on
2025 8251 receive ready did not come on
2026 8251 could not force "overrun" error status
2027 interrupt failure, no timer interrupt
2028 transmit interrupt, card or planar failure
2029 transmit interrupt, card failure
2030 receive interrupt, card or planar failure
2031 receive interrupt, card failure
2033 ring indicate stuck on
2034 receive clock stuck on
2035 transmit clock stuck on
2036 test indicate stuck on
2037 ring indicate stuck on
2038 receive clock not on
2039 transmit clock not on
2040 test indicate not on
2041 DSR not on
2042 CD not on
2043 CTS not on
2044 DSR stuck on
2045 CD stuck on
2046 CTS stuck on
2047 unexpected transmit interrupt
2048 unexpected receive interrupt
2049 transmit data did not equal receive data
2050 8251 detected overrun error
2051 lost DSR during data wrap
2052 receive time-out during data wrap

21xx Alternate Bisync Communications Adapter Errors:

2100-2152 same as 2000-2052

22xx Cluster Adapter Errors

24xx EGA Errors:（EGA顯示卡）

2401 adapter test failure
2408 user-indicated display attributes
2416 user-indicated character set
2424 user-indicated 80x25 mode
2432 user-indicated 40x25 mode
2440 user-indicated 320x200 graphics mode
2448 user-indicated 640x200 graphics mode
2456 light pen test
2464 user-indicated screen paging test

25xx EGA Display Errors

28xx 3278/79 Emulator Adapter (PC,XT) Errors

29xx Color Matrix Printer Errors

30xx Local Area Network Adapter Errors

31xx Alternate Local Area Network Adapter Errors

33xx Compact Printer Errors

36xx IEEE 488 Adapter Errors

37xx Reserved for Future Use Errors

38xx Data Acquisition Adapter Errors

39xx PGA Display and/or Adapter Errors

48xx Internal Modem Errors

49xx Alternate Internal Modem Errors

71xx Voice Communications Adapter Errors

73xx 3.5 Inch Diskette Drive Errors:（軟驅）

7301 diskette drive/adapter test failure
7306 diskette change line error
7307 write-protected diskette
7308 bad command
7310 track zero error
7311 timeout
7312 bad NEC7313 bad DMA
7314 DMA boundary error
7315 bad index
7316 speed error
7321 bad seek
7322 bad CRC
7323 record not found
7324 bad address mark
7325 bad NEC seek

86xx PS1 Mouse Errors

- all error codes for the diagnostic and advanced diagnostic
packages for the PC, XT and AT are represented with the device
number followed by two digits other than 00. The device number
plus 00 represents successful completion of the test.